MTi Polyexe, Blog, blown film, base films, release liner, plastic film, silicone coatings, silicone release liner, custom coating converting, plastics films, Blown Film Extrusion
|One of the most common methods of film manufacture is Blown Film (also referred to as the Tubular Film) Extrusion. The process involves extrusion of a plastic through a circular die, followed by "bubble-like" expansion. The principal advantages of manufacturing film by this process include the ability to:
Plastic melt is extruded through an annular slit die, usually vertically, to form a thin walled tube. Air is introduced via a hole in the centre of the die to blow up the tube like a balloon. Mounted on top of the die, a high-speed air ring blows onto the hot film to cool it. The tube of film then continues upwards, continually cooling, until it passes through nip rolls where the tube is flattened to create what is known as a ' lay-flat' tube of film. This lay-flat or collapsed tube is then taken back down the extrusion ' tower' via more rollers. On higher output lines, the air inside the bubble is also exchanged. This is known as IBS (Internal Bubble Cooling).
The lay-flat film is then either kept as such or the edges of the lay-flat are slit off to produce two flat film sheets and wound up onto reels. If kept as lay-flat, the tube of film is made into bags by sealing across the width of film and cutting or perforating to make each bag. This is done either in line with the blown film process or at a later stage.
Typically, the expansion ratio between die and blown tube of film would be 1.5 to 4 times the die diameter. The drawdown between the melt wall thickness and the cooled film thickness occurs in both radial and longitudinal directions and is easily controlled by changing the volume of air inside the bubble and by altering the haul off speed. This gives blown film a better balance of properties than traditional cast or extruded film which is drawn down along the extrusion direction only.
|3 layer die head with air ring and internal bubble cooling||Film bubble going into a collapsing frame|
|Control panel graphic from an automated blown film line||Taking an edge trim from film web|
|The layflat tube is separated into 2 single sheets||Blown Film Line In Action|
Polyethylenes (HDPE, LDPE and LLDPE) are the most common resins in use, but a wide variety of other materials can be used as blends with these resins or as single layers in a multi-layer film structure. these include pp, pa, evoh. In some cases, these materials do not gel together, so a multi-layer film would delaminate. To overcome this, small layers of special adhesive resins are used in between. These are known as “tie layers”.
MTI Polyexe Corporation wants to thank you all for giving us a great 2011. We look forward to providing more innovative products and high quality service you have come to expect from us in 2012. If you are already a customer we are grateful for your loyalty. If you are not yet a customer and are looking for a company that can save you money and time please contact us.
To make plastics, chemists and chemical engineers must do the following on an industrial scale:
Tags: anti skid, RELEASE PAPERS, RELEASE FILMS, FILMS - Coextrusion, FILMS - Polyethylene, FILMS - Polypropylene, blown film, base films, custom coating converting, Polyolefins, blown film extrusion, Film slitting, How plastics work
Tags: anti skid, RELEASE PAPERS, FILMS - Ethyl Vinyl Acetate, blown film, base films, release liner, plastic film, silicone coatings, custom coating converting, Film slitting, silicone release liner, TPO, converting, rewinding services, cutting
Tags: anti skid, RELEASE PAPERS, RELEASE FILMS, FILMS - Coextrusion, HDPE, LDPE, LLDPE, blown film, base films, release liner, plastic film, silicone coatings, custom coating converting, Polyethylene, blown film extrusion
MTi Polyexe Corporation would like to thank every one for taking the time to visit our site.
Tags: anti skid, RELEASE PAPERS, RELEASE FILMS, FILMS - Coextrusion, FILMS - Ethyl Vinyl Acetate, FILMS - Polyethylene, LDPE, FILMS - Polypropylene, blown film, base films, release liner, plastic film, silicone coatings, custom coating converting, Polyolefins, Polyethylene, blown film extrusion
This is QR Code will let your phone contact you to sales just by scanning.
Tags: anti skid, blown film, base films, release liner, plastic film, silicone coatings, custom coating converting, Polyolefins, Polyethylene, blown film extrusion, silicone release liner, Polypropylene, TPO